Description
OVERVIEW
Advanced Engine Suite (AES) is a multi-functional management box suitable for application in airplanes equipped with engines.
Through the VBAT (XT30/PWR) power port, users can use the same battery to power all connected devices, eliminating the trouble of providing an independent power supply for the ignition control unit. AES also adopts a safety solution to avoid potential risks caused by interference between the connected ignition and receiver devices.
The AES module is equipped with a wealth of sensor interfaces, including 2 RPM sensor ports, 1 flowmeter sensor port, and 5 temperature sensor ports (Sensors are required to be purchased separately. Sensor options: TEMS Temperature Sensor [04100427], Flowmeter [03040703] ). In addition, AES also provides 2 AD ports, allowing users to flexibly use different types of AD devices required in your airplane. At the same time, through the FBUS/S.Port feature of the connected receiver, users can monitor the telemetry data in real-time on the transmitter to know the aircraft’s operating status.
FEATURES
- Ignition Battery Eliminator Design (Independent battery is NOT needed.)
- Anti-interference Capability between Ignition & Receiver Parts
- 5 Ports for Temperature Sensors
2 Ports for RPM Sensors
2 Ports for AD/RPM Sensors
1 Port for Flowmeter Sensors
(Sensors are required to be purchased separately. Sensor options: TEMS Temperature Sensor [04100427], Flowmeter [03040703] ) - 1 Powering Port for Receiver
- 1 Powering Port for Ignition Kill Switch Unit
- Signal Input Ports for FBUS/S.Port (Auto Recognization), SBUS, and PWM
- 1 Battery Input Port with XT30 Connector (Input Range: 4.5-13V)
- Real-Time Configuration Capability (by S.Port of ETHOS radio or FBUS capable receivers)
SPECIFICATIONS
- Dimension: 50×46.4x18mm (L×W×H)
- Weight: 53.5g
- Battery Voltage Input Range: 4.5-13V
- Battery Input Connector: XT30
- IGN (Ignition Port) Voltage Output Range: 4.5-13V (Sync with the input voltage settings of VBAT.)
- Operating Current: 20mA@5V
- Signal Voltage Level
– RPM1/RPM2 Port: 3V-12V (Requires the driven current>5mA)
– Flow Port: 3.3V
– AD1/AD2 Port: 0-3.3V