Description
OVERVIEW
FEATURES
SPECIFICATIONS
DOWNLOAD
OVERVIEW
This receiver is designed to be used for the Gliders. FrSky built the variometer sensor into the RX8R receiver, this will give you telemetry data like altitude and vertical speed. The G-RX8 supports the redundancy function as well, this means you can add on another receiver to create a back-up in case one fails. In addition, it supports SBUS and PWM mode, you can switch between the 2 channels between very easily.
*The G-RX8 is an ACCESS compatible receiver, by flashing the ACCESS firmware it can be re-bound at any time without accessing the F/S button once it is registered to an ACCESS radio.
FEATURES
- Integrate with high precision variometer sensor
- Support redundancy function
- Support telemetry data transmission
- Switchable SBUS/PWM mode (1~8CH from PWM outputs and 1~16CH from SBUS output)
SPECIFICATIONS
- Dimension: 55.26*17*8mm
- Weight: 5.8g
- Number of Channels: 16 CH(1-8ch/9-16ch from conventional channel outputs, 1~16CH from SBUS port).
- Operating Voltage Range: 3.5 -10V
- Operating Current: 100mA@5V
- Operating Range: Full range
- Firmware Upgradable
- Compatibility: ACCST D16 / ACCESS mode
- Servo frame rate:
ACCST | 9ms (HS—High Speed Mode)/18ms (FS—Normal Speed Mode)
ACCESS | 7ms (HS—High Speed Mode)/20ms (FS—Normal Speed Mode)
