RX8R PRO Introduction
An upgraded version based on the RX8R receiver, it has all the same features including redundancy. The Pro version has higher precision and lower latency. It’s deviation of PWM is reduced to 0.5us, and the delay of PWM output is 9ms less than that of the X8R in high speed mode. A feature that deserves mention is the decreased effect of interference caused by the ignition process.
Specifications
- Dimension: 25mm*26.6mm*14.2mm (L*W*H)
- Weight: 12.1g
- Numbers of Channels: 16CH(1～8CH PWM or 9~16CH PWM from conventional channel outputs, 1~16CH from SBUS)
- Operating Voltage Range: 3.5V~10V
- Operating Current: 100mA@5V
- Operating Range: full range
- Compatibility: D16/D8 mode
- Servo Frame Rate: 9ms (HS—High Speed Mode)/18ms (FS—Normal Speed Mode)
Features
- Strong anti-interference performance in ignition process
- Higher precision of PWM
- Lower latency on the PWM output
- Support redundancy function
- Smart Port enabled and support telemetry data transmission
Promotional Price (Tax Excluded): $39.99
More details link : https://www.frsky-rc.com/product/rx8r-pro/
Gas Suite Introduction
The Gas Suite is a multifunctional unit which is mainly used to monitor the operating state of an internal combustion engine model. It allows you to measure in real-time the operating temperature, RPM and fuel flow velocity. In addition the Gas Suite also allows you to control the ignition system manually, allowing the user full control during operation.
Specifications
- Weight：19g
- Dimension: 40*28.8*12.7mm (L*W*H)
- Operating Voltage Range: 4.0V~10V
- Measured Range of Speed: 100~100000r/min (Degree of Accuracy: ±2%)
- Measured Range of Flow Velocity: 20~800ml/min (Degree of Accuracy: ±2%)
- Measured range of temperature:
- TEMP1: PT100: -20℃~ 310℃, Degree of accuracy: ±1%
- TEMP2: NTC: -20℃~ 250℃, Degree of accuracy: ±1%
- Physical interface: Temp1 & 2, FLOW, CDI pulse In & Out, Channel In, Smart Port
Features
- Monitor in real-time environment temperature and operating temperature of the engine.
- Monitor in real-time RPM and the gas flow velocity
- Smart Port enabled and support telemetry data transmission
- Enable and disable the ignition control system manually
- Parameters (Initial quantity of gas, alarm values and etc.) configuration through transmitters and FreeLink (PC)
More details link : https://www.frsky-rc.com/product/gas-suite/
