Description
OVERVIEW
FEATURES
SPECIFICATIONS
DOWNLOAD
OVERVIEW
This FrSky G-RX6 is designed to be used with Gliders. FrSky built a variometer sensor right into the X6R receiver, this will give you telemetry data like altitude and vertical speed. The G-RX6 features 6 PWM outputs with higher precision and lower latency. The latency of the PWM output is 9ms less than that of the X6R, in high speed mode. It also supports the redundancy function, so it can be used in conjunction with other receivers. The G-RX6 and the whole RX-line has a 40% increased operating range compared to the previous X series receivers.
*The G-RX6 is an ACCESS compatible receiver, by flashing the ACCESS firmware it can be re-bound at any time without accessing the F/S button once it is registered to an ACCESS radio.
FEATURES
- Small and High sensitivity (40% increase of the range compared to previous X series receivers)
- Integrated with high precision variometer sensor
- Higher precision PWM and Low latency PWM output
- Lower power consumption
- Redundancy function supported
- Smart Port enabled and telemetry data transmission supported
- Battery voltage detection supported
- 2 detachable IPEX 4 Connector antennas
- PCB protection with the comformal coating craftwork
SPECIFICATIONS
- Dimension: 21.1×13×7.3mm (L×W×H)
- Weight: 2.2g / 2.6g (with two antennas)
- Number of Channels: 16CH (1-6CH PWM from conventional channel outputs, 1-16CH from SBUS OUT port)
- Operating Voltage Range: 3.5V-10V
- Operating Current: 100mA@5V
- Operating Range: >2km
- Servo Frame Rate:
ACCST | 9ms (HS—High Speed Mode)/18ms (FS—Normal Speed Mode)
ACCESS | 7ms (HS—High Speed Mode)/20ms (FS—Normal Speed Mode) - Compatibility: ACCST D16 / ACCESS mode
