TW SR8

– Updated the Calibration and Setting method for Stab functions. (ETHOS v1.6.0 & New v3.0.1 Stab Lua tools are required to update!) (for Stab capable series)
– Changed the ACCZ setting in static from the original -1g to +1g. (for Stab capable series)
– Combined VFR telemetry data. (for TD & TW series)
– Added the Failsafe data-saving feature on the receiver end. The Failsafe function must be reset and checked especially while switching to another model before you fly with it. (for All series)

Note: Please ensure you are using the v3.0.0 (or later versions) Lua scripts to configure the Stab device with flashed this firmware version. The older Stab Lua tools or the Stab tools in Device Config (ETHOS’s integration) are not compatible.

1. Added the Reset function to recover the Stab settings to the factory settings.
2. Added the AUX mode option to each Stab channel.
3. Cancelled the operation requiring putting the Throttle stick to the lowest (＜1000us) while doing the Self-Check.
4. Added the Stick Priority function for Stab channels
5. The redundancy function turns valid once powered on.
Notice: Please reset your stab device (by Lua tool) after flashing with this firmware version, and reconfigure it to make sure it can work properly.
Please read the instructional manual to ensure the self-stabilization function works properly. Click and Read → Manual